Wednesday, June 27, 2012

How to back up Outlook Express items

Step 1: Copy message files to a backup folder

Step A: Locate the Store folder
  1. Start Outlook Express.
  2. Click Tools, and then click Options.
  3. On the Maintenance tab, click Store Folder.
  4. In the Store Location dialog box, copy the store location. To do this, follow these steps:
    1. Put the mouse pointer at one end of the box under the Your personal message store is located in the following folder box.
    2. Press and hold the left mouse button, and then drag the mouse pointer across the Your personal message store is located in the following folder box.
    3. Press CTRL+C to copy the location.
  5. Click Cancel, and then click Cancel again to close the dialog box.
Step B: Copy the contents of the Store folder
  1. Click Start, click Run, press CTRL+V, and then click OK.
  2. On the Edit menu, click Select All.
  3. On the Edit menu, click Copy, and then close the window.
Step C: Create a backup folder
  1. Right-click any empty area on your desktop, click New, and then click Folder.
  2. Type Mail Backup for the folder name, and then press ENTER.
Step D: Paste the contents of the Store folder into the backup folder
  1. Double-click the Mail Backup folder to open it.
  2. Right-click inside the Mail Backup folder window, and then click Paste.

Step 2: Export the Address Book to a .csv file

Important Make sure that you follow this step if you use multiple identities in Outlook Express.

Microsoft Outlook Express 5.x and Microsoft Outlook Express 6.0 use a Windows Address Book (.wab) file to store Address Book data. The individual data for each identity is stored in a folder by user name within the .wab file that is used.

The only way to separate the Address Book data for different identities is to export the data to a .csv file while you are logged in as a specific identity. If the .wab file becomes dissociated from the user identities, the data can be exported only as one total. In this case, the data cannot be exported folder by folder.

There is another reason to export the .wab file to a .csv file. If the .wab file not exported to a .csv file, but the .wab file is shared with Microsoft Outlook, the addresses are stored in the personal folders (.pst) file in Outlook. When you export the file to a .csv file by using the File menu in Outlook Express, the correct contacts are exported. However, if the Address Book is shared with Outlook, you cannot use the File menu option to export from the Address Book. This option is unavailable.

To export the Address Book to a .csv file, follow these steps:
  1. On the File menu, click Export, and then click Address Book.
  2. Click Text File (Comma Separated Values), and then click Export.
  3. Click Browse.
  4. Select the Mail Backup folder that you created.
  5. In the File Name box, type address book backup, and then click Save.
  6. Click Next.
  7. Click to select the check boxes for the fields that you want to export, and then click Finish.
  8. Click OK, and then click Close.

Step 3: Export the mail account to a file

  1. On the Tools menu, click Accounts.
  2. On the Mail tab, click the mail account that you want to export, and then click Export.
  3. In the Save In box, select the Mail Backup folder, and then click Save.
  4. Repeat these steps for each mail account that you want to export.
  5. Click Close.

Step 4: Export the newsgroup account to a file

  1. On the Tools menu, click Accounts.
  2. On the News tab, click the news account that you want to export, and then click Export.
  3. In the Save In box, select the Mail Backup folder, and then click Save.
  4. Repeat these steps for each news account that you want to export.
  5. Click Close.

How to restore Outlook Express items

Note To restore items when you use multiple identities in Outlook Express, you may have to re-create the identities before you follow these steps. Repeat each step as needed for each identity.

Step 1: Import messages from the backup folder

  1. On the File menu, point to Import, and then click Messages.
  2. In the Select an e-mail program to import from box, click Microsoft Outlook Express 5 or Microsoft Outlook Express 6, and then click Next.
  3. Click Import mail from an OE5 store directory or Import mail from an OE6 store directory, and then click OK.
  4. Click Browse, and then click the Mail Backup folder.
  5. Click OK, and then click Next.
  6. Click All folders, click Next, and then click Finish.

Step 2: Import the Address Book file

  1. On the File menu, click Import, and then click Other Address Book.
  2. Click Text File (Comma Separated Values), and then click Import.
  3. Click Browse.
  4. Select the Mail Backup folder, click the address book backup.csv file, and then click Open.
  5. Click Next, and then click Finish.
  6. Click OK, and then click Close.

Step 3: Import the mail account file

  1. On the Tools menu, click Accounts.
  2. On the Mail tab, click Import.
  3. In the Look In box, select the Mail Backup folder.
  4. Click the mail account that you want to import, and then click Open.
  5. Repeat these steps for each mail account that you want to import.
  6. Click Close.

Step 4: Import the newsgroup account file

  1. On the Tools menu, click Accounts.
  2. On the News tab, click Import.
  3. In the Look In box, select the Mail Backup folder.
  4. Click the news account that you want to import, and then click Open.
  5. Repeat these steps for each news account that you want to import.
  6. Click Close.

How to preserve the Blocked Senders list and other e-mail rules

For more information about how to preserve the blocked senders list and other e-mail rules, click the following article number to view the article in the Microsoft Knowledge Base:
276511  (http://support.microsoft.com/kb/276511/ ) How to back up and restore Outlook Express Blocked Senders list and other mail rules

Friday, June 1, 2012

Boot-Repair for back linux on windows installed pc






Boot-Repair is a simple tool to repair frequent boot issues you may encounter in Ubuntu like when you can't boot Ubuntu after installing Windows or another Linux distribution, or when you can't boot Windows after installing Ubuntu, or when GRUB is not displayed anymore, some upgrade breaks GRUB, etc.
Boot-Repair lets you fix these issues with a simple click, which (generally reinstalls GRUB and) restores access to the operating systems you had installed before the issue.
Boot-Repair also has advanced options to backup table partitions, backup bootsectors, create a Boot-Info-Summary (to get help by email or forum), or change the default repair parameters: configure GRUB, add kernel options (acpi=off ...), purge GRUB, change the default OS, restore a Windows-compatible MBR, repair a broken filesystem, specify the disk where GRUB should be installed, etc.
Boot-Repair is a free software, licensed under GNU-GPL. Boot-Repair should be soon included in Ubuntu official repositories, until then use it at your own risks.
http://pix.toile-libre.org/upload/original/1335260967.png

Getting Boot-Repair

1st option : get a CD including Boot-Repair

The easiest way to use Boot-Repair is to burn one of the following disks and boot on it.
  • Boot-Repair-Disk is a CD starting Boot-Repair automatically. (English only, 32&64bits compatible, based on Debian-live so Wifi drivers are not recent).
  • Boot-Repair is also included in Ubuntu-Secure-Remix (multi-languages, ok for Wifi, based on Ubuntu 12.04 LTS, run Boot-Repair from the Dash)
Remark : you can also install the ISO on a live-USB (eg via UnetBootinLiliUSB or MultiSystem).

2nd option : install Boot-Repair in Ubuntu

Remark: this can also be performed from a live-CD or live-USB.
Either add ‘ppa:yannubuntu/boot-repair’ to your Software Sources via the Software Centre or, for speeds-sake, add it using a new Terminal session:
sudo add-apt-repository ppa:yannubuntu/boot-repair && sudo apt-get update
sudo apt-get install -y boot-repair && boot-repair
Boot-Repair can be installed & used from any Ubuntu session (normal session, or live-CD, or live-USB). PPA packages are available for Ubuntu 10.04, 10.10, 11.04, 11.10 and 12.04.

Using Boot-Repair

  • launch Boot-Repair from either :
    • the dash (Unity)
    • System->Administration->Boot-Repair menu (Gnome)
    • by typing 'boot-repair' in a terminal
  • Then try "Recommended repair" button. When repair is finished, note the URL that appeared on a paper, then reboot and check if you recovered access to your OSs. 
If the repair did not succeed, indicate the URL to people who help you by email or forum.

Advanced options

http://pix.toile-libre.org/upload/img/1335263156.png http://pix.toile-libre.org/upload/img/1335263804.png http://pix.toile-libre.org/upload/img/1335263271.png http://pix.toile-libre.org/upload/img/1335263417.png http://pix.toile-libre.org/upload/img/1335263366.png

RecoveringUbuntuAfterInstallingWindows






This page documents how to restore or recover the boot-loader (GRUB) after installing Windows. Some reasons to repair your boot-loader might include installing Microsoft Windows after you have installed Ubuntu, adding or removing a hard drive, or changing hard drive settings.

Using the Ubuntu CD (Recommended)

The graphical way

  • Insert your Ubuntu CD, reboot your computer and set it to boot from CD in the BIOS and boot into a live session. You can also use a LiveUSB if you have created one in the past.
  • Install and run Boot-Repair
  • After this, click "Recommended repair" and apply. If you are willing to use the advanced options, make sure you leave the "Reinstall GRUB" checkbox ticked.
  • Now reboot your system. The usual GRUB boot menu should appear. If it does not, hold Left Shift while booting. You will be able to choose between Ubuntu and Windows.

The terminal way

* Open a terminal. As of Ubuntu 11.10 and 11.04, this can be done by opening the Unity Dash (you can click the Ubuntu logo in the top panel or use the Windows key on your keyboard) and typing in "Terminal", and clicking what comes up. On earlier versions, you can achieve this by going to Applications -> Accessories -> Terminal.
  • You are then presented with a standard bash prompt, type:
sudo grub-install /dev/XXX
where XXX is the device of your Ubuntu install. (eg: grub-install /dev/sdb). Hint: You can also use /dev/disk/by-label/ if the partition you installed on has a label. You can determine the /dev node for such a device by running:
ls -l /dev/disk/by-label/
This will give the output of something like:
lrwxrwxrwx 1 root root 10 Oct 16 10:27 data -> ../../sdb2
lrwxrwxrwx 1 root root 10 Oct 16 10:27 data2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 16 10:27 fat -> ../../sda6
lrwxrwxrwx 1 root root 10 Oct 16 10:27 home -> ../../sda7
lrwxrwxrwx 1 root root 10 Oct 16 10:27 root -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 16 10:27 swap -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 16 10:27 windows -> ../../sdb1
You can also use fdisk if you do not see the /dev/disk/by-label:
$ sudo fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001bc54

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       18725   150403072   83  Linux
/dev/sda2           18725       19458     5884929    5  Extended
/dev/sda5           18725       19458     5884928   82  Linux swap / Solaris

Disk /dev/sdb: 15.1 GB, 15103033344 bytes
64 heads, 32 sectors/track, 14403 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00068852

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1       14403    14748656    c  W95 FAT32 (LBA)
From here, find only the drive name, ignore the partition number, that is, for partitions labeled "root", "data2", "fat", "home" and "swap" it's all still just sda. This is due to the fact that GRUB is installed in the MBR of the drive, and not on a partition.
  • Now reboot your system. The usual GRUB boot menu should appear. If it does not, hold Left Shift while booting. You will be able to choose between Ubuntu and Windows.

Using the Ubuntu Alternate CD

  • Boot your system from the Ubuntu Alternate CD.
  • When the Ubuntu splash screen comes up with the boot: prompt, type in rescue and press enter.
  • Choose your language, location (country) and then keyboard layout as if you were doing a fresh install.
  • Enter a host name, or leave it with the default (Ubuntu).
  • At this stage you are presented with a screen where you can select which partition is your root partition (there is a list of the partitions on your hard drive, so you are required to know which partition number Ubuntu is on). This will be dev/discs/discY/partX, where the X is a partition number and Y is the number of the drive.
  • Now proceed as described in "The terminal way" above.

See also